<TAKAOKA-CAM TechnoCut-50/70＞
TOP-PAGE
TAKAOKA　Techno　Cut Auto Cutter
TC50mm/ 70mmSeries
　

　



 Designed for optimum performance and maximum reliability.
Available in more than 30 configurations to meet your needs depending on your material or production.

Takaoka supports customized software for your typical requirement and right solution for your application.

Save your fabric, cutting time, and maintenance costs and increase your productivity.

Ergonomically designed operator console for efficiency and comfort.
Options available

Turret type auto 6 punch drill changer．

Lingerie & foundation material cutting configuration．

Bar-code reader for easy and error free cut data entry.

Light or beeper alarm for alert such as lower vacuum pressure, machine traverse etc for quality job and safety.

Lateral traverse feature for feed-in material from more than 2 spreading tables.

Heater drill marking．

Production report software．

Knife chiller for fusing-free cutting．

Positive wind/rewind air re-sealer for minimizing air leakage．

Bristle cleaner．

Safety stop bumper．
Specifications
Cutting method Knife reciprocation with optional knife chiller for fusing-free operation
Cut Window Available in the combination of 4  width sizes x 4  length sizes
Compressing Method Inverter controlled variable vacuum compression by blower units
Marking Cold drill (Hot drill also available as an option)
Operation Panel Touch operation LCD switch panel with air pressure regulators
Compressed air requirement 100 litters/min at 6〜7Kgs/cm2 pressure (Dry air)
Environment Temp.：10〜35 degree C　Humidity：30%〜80% (No condensing)
Dimensions 2445W x 5490L(mm) for TC50 1600 x 2000 size
Weight 2800Kg 〜3500Kg
Power 200/220V、　23（38）KW、3−Ph.  100／110V, 1KW, Single Ph.
TOP-PAGE
TAKAOKA CO., LTD.
Head office : 2-4-9, Uchihiranomachi, Chuo-Ku, Osaka 540-0037
TEL: ++81 6 6943-5050 FAX: ++81 6 6943-5053